1954 A7SS valve spring keepers

[orabanda]

Hi all,
I need a complete set of upper and lower valve spring keepers, and valve collets, to suit an early A7 alloy head (separate inlet manifold).

Can anyone help please?

Many thanks,

Richard

[trevinoz]

Richard,
                  Doesn't the A7SS use the same springs, cups, caps and colletts as the Flash & A7?
Surely you have plenty of them lying about your shop.

Trev.

[orabanda]

Hi Trev,
I was hoping they were all the same part.

Don't think I have any spare collets & keepers; several bare iron heads only.
Richard

[trevinoz]

I had a look at the parts book, Richard, and found that the only odds one out in the valve department are the Rockets, as I thought.
I'll have a look through my bits and see if there are any orphans.

Trev.

[orabanda]

Fantastic; thank you!!!

[WozzA]

I've got a donor early round fin IRON head in the shed with the lower cups under the guides..
If thats what your after I can remove them 4 you?

[orabanda]

Hi Wozza,
What a bunch of great people on this forum!

Thanks for your help.

Brian has found the parts I need, except for two of the upper cups; so they are the only other items I am needing now.

Therefore, thanks very much for your help, but Brian has "covered" the bottom adaptors for me.

Regards,
Richard

[WozzA]

No Wuckers...   

[trevinoz]

Righto Richard, I have 2 caps for you.
I will PM you.

[Russ]

Hi Guys,
I also need two lower valve spring cups for my iron head 52 A10.
WozzA I sent you a P.M

Cheers Russ

[WozzA]

replied to your PM & their yours buddy..