Author Topic: wanted for my rgs project  (Read 1096 times)

Offline Andy BSA

  • Active
  • *
  • Join Date: Feb 2014
  • Posts: 10
  • Karma: 0
wanted for my rgs project
« on: 03.02. 2014 23:03 »
hi looking for bsa 140 mph speedo rgs also Dunlop wm2 alloy rims any other parts for my project well got to start with the hard bits!!!!

BSA RR &super rockets58 59 61 62 63
RGS 4number

Offline wilko

  • Resident Legend
  • *****
  • Join Date: Mar 2010
  • Posts: 681
  • Karma: 4
Re: wanted for my rgs project
« Reply #1 on: 03.02. 2014 23:22 »
Good luck finding the speedo! See if you can find a new face for 140mph and fit it to a 120mph chrono and get it recalibrated.

Online Billybream

  • Resident Legend
  • *****
  • Join Date: Jan 2012
  • Posts: 684
  • Karma: 8
Re: wanted for my rgs project
« Reply #2 on: 04.02. 2014 09:30 »
Hi Andy.
Try Ashley Pople, did me a great job sourcing a rev counter for my Super Rocket.
TEL/FAX: +44 (0)1252 329826
MOBILE: +44 (0)7824 884434
http://www.speedorepairs.co.uk
email: a.pople@btconnect.com
A.E. Pople, Speedo Repairs,
C/O A & E Coachworks,
The Vehicle Centre
Ashchurch Road,
Aldershot,
Hants,
GU12 6LX
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.

Offline stu.andrews

  • A's Good Friend
  • ***
  • Join Date: Mar 2012
  • Posts: 141
  • Karma: 4
Re: wanted for my rgs project
« Reply #3 on: 04.02. 2014 10:55 »
Can recommend Ashley, too.
2010 Yamaha TDM 900-Touring
2012 Triumph Bonneville SE-Fun


Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4156
  • Karma: 54
Re: wanted for my rgs project
« Reply #4 on: 04.02. 2014 15:31 »
HI
Is the 140mph speedo the correct fitment for the RGS ?

Dunlop Alloy rims seem to fetch more than their weight in Gold  *eek* *eek*
Remember that the RGS uses a WM2 front rim, (Goldie WM1)
The spoke pattern is different between 8in. single sided and 190mm hubs
Like everything of value I have heard of fakes being produced  *sad2* *sad2*
1961 Super Rocket
1963 RGS (ongoing)

Offline Andy BSA

  • Active
  • *
  • Join Date: Feb 2014
  • Posts: 10
  • Karma: 0
Re: wanted for my rgs project
« Reply #5 on: 04.02. 2014 16:43 »
Good luck finding the speedo! See if you can find a new face for 140mph and fit it to a 120mph chrono and get it recalibrated.
yes i have that in mind

BSA RR &super rockets58 59 61 62 63
RGS 4number

Offline Andy BSA

  • Active
  • *
  • Join Date: Feb 2014
  • Posts: 10
  • Karma: 0
Re: wanted for my rgs project
« Reply #6 on: 04.02. 2014 16:48 »
HI
Is the 140mph speedo the correct fitment for the RGS ?

Dunlop Alloy rims seem to fetch more than their weight in Gold  *eek* *eek*
Remember that the RGS uses a WM2 front rim, (Goldie WM1)
The spoke pattern is different between 8in. single sided and 190mm hubs
Like everything of value I have heard of fakes being produced  *sad2* *sad2*
Yes new one are avialable around the £500 just for the 190mm hub and brake  i have a 18 inch rear Dunlop 40 hole i would like to swop

BSA RR &super rockets58 59 61 62 63
RGS 4number

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4156
  • Karma: 54
Re: wanted for my rgs project
« Reply #7 on: 04.02. 2014 16:58 »
Hi
Adding £400+ for stamping an italian alloy rim  *????* *????* *????*
 *razz* *razz* *razz* *razz* *razz* *razz* *razz* *razz* *razz* *razz* *razz* *razz*

John
1961 Super Rocket
1963 RGS (ongoing)