« previous next »
Pages: [1]   Go Down

Author Topic: clutch gearbox arm ?  (Read 1082 times)

Offline A10 JWO

  • Resident Legend
  • *****
  • Join Date: Oct 2012
  • Posts: 730
  • Karma: 2
clutch gearbox arm ?
« on: 04.06. 2013 16:31 »
Hi
Does anyone make a new chrome clutch arm which fits on top of the gearbox of a swinging arm standard gearbox. Never seen one advertised ?

Regards Colin
Logged

Offline BVSR

  • A's Good Friend
  • ***
  • Join Date: Nov 2011
  • Posts: 85
  • Karma: 2
Re: clutch gearbox arm ?
« Reply #1 on: 04.06. 2013 21:23 »
Logged
Markku
A7 1961    A10GF 1954    A10GF 1960    A10GF 1961 sidecar    A10SR 1958    A10SR 1959 
A10SR 1960   A10SR -61  A10SR 1963    A10SR 1963   A65T 1968    A65L 1968   B25SS 1971    B31 1952  
B31 1952   B33 1947  B33 1951   DBD34 GS 1958    NSU Supermax 1962    Husqvarna 510TE 1984
Finland[/iu

Offline RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6483
  • Karma: 55
Re: clutch gearbox arm ?
« Reply #2 on: 04.06. 2013 22:32 »
Advertised for "B31 Goldstar, Plunger/Rigid".  Begs the question as to if it fits a swingarm gearbox. Someone here will know, or you could call SRM.

Richard L.
Logged

Offline BVSR

  • A's Good Friend
  • ***
  • Join Date: Nov 2011
  • Posts: 85
  • Karma: 2
Re: clutch gearbox arm ?
« Reply #3 on: 05.06. 2013 06:49 »
Oops! That is for rigid/plunger models, but there is one also to s/a box, on page 37 in their Special Products Gataloque:

http://www.srmclassicbikes.com/sites/default/files/srm-sp-2010.pdf

Markku
Logged
Markku
A7 1961    A10GF 1954    A10GF 1960    A10GF 1961 sidecar    A10SR 1958    A10SR 1959 
A10SR 1960   A10SR -61  A10SR 1963    A10SR 1963   A65T 1968    A65L 1968   B25SS 1971    B31 1952  
B31 1952   B33 1947  B33 1951   DBD34 GS 1958    NSU Supermax 1962    Husqvarna 510TE 1984
Finland[/iu

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: clutch gearbox arm ?
« Reply #4 on: 05.06. 2013 08:55 »
The "B" rigid/plunger is longer in the shaft. DAMHIK *conf* Any body want one?
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: clutch gearbox arm ?
« Reply #5 on: 05.06. 2013 09:49 »


  The swing arm and Plunger ones have the same part number, Lightning Spares had them listed a couple of years ago too, yea could try them also.
 cheers duTch
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia
Pages: [1]   Go Up
« previous next »