Author Topic: Positive earth?  (Read 1963 times)

Offline ShaunMac

  • A's Good Friend
  • ***
  • Join Date: Feb 2013
  • Posts: 128
  • Karma: 1
Positive earth?
« on: 23.03. 2013 21:42 »
Hi guys,

May seem like a really daft question, but as I got my Super Rocket with no battery on and there's been a bit of bodging on the wiring, which I'm in the process of sorting, can I ask, does the bike have a Positive earth?
Is there a way of checking?

Thanks, Shaun
61 Super Rocket swing-arm

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3234
  • Karma: 71
Re: Positive earth?
« Reply #1 on: 23.03. 2013 21:43 »
Certainly would have been from the factory, Shaun.

Trev.

Offline ShaunMac

  • A's Good Friend
  • ***
  • Join Date: Feb 2013
  • Posts: 128
  • Karma: 1
Re: Positive earth?
« Reply #2 on: 23.03. 2013 21:59 »
Thanks Trev. Looking at the wiring diagrams there's a few bits different on mine, mainly the wires from the light switch but will connect the new battery positive to earth and hope I don't get any smoke!  *warn*
61 Super Rocket swing-arm

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3230
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Positive earth?
« Reply #3 on: 23.03. 2013 22:06 »
Quote
hope I don't get any smoke!
If not already done, use a fuse when experimenting, something like 15 A should prevent anything from frying if there's a short, if it burns out start some investigations. btw, good to always use a fuse on the battery side.


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline ShaunMac

  • A's Good Friend
  • ***
  • Join Date: Feb 2013
  • Posts: 128
  • Karma: 1
Re: Positive earth?
« Reply #4 on: 23.03. 2013 22:13 »
Going to fit a blade fuse in-line. I take it it would be best on the negative line or on the positive between earth?
61 Super Rocket swing-arm

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3230
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Positive earth?
« Reply #5 on: 23.03. 2013 22:16 »
Quote
on the negative line or on the positive between earth
Either side of the battery will work (IMO). But I 'would somehow' choose to put it on the battery's 'regulator side' (negative in your case), with the battery connection to frame (positive in your case) unfused.


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1977
  • Karma: 17
Re: Positive earth?
« Reply #6 on: 24.03. 2013 05:56 »
Just a little tip if you dont know which way around the bike was earth wise make sure you flash the dynamo as it might otherwise try to charge the wrong way around....at least with an electronic reg anyway.
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Online Billybream

  • Resident Legend
  • *****
  • Join Date: Jan 2012
  • Posts: 682
  • Karma: 8
Re: Positive earth?
« Reply #7 on: 24.03. 2013 07:37 »
I would recommend you consider fitting 3 fuses, and site them for easy access.
Use the car type and you can gang them together, each side of the battery  at 15Amp  and one on the feed wire from the regulator to the lighting switch 20Amp. Mine came off Ebay for pack of 3 @ £6.20.
1960 Super Rocket, owned since 1966, back on the road 2012 after being laid up for 29yrs.

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: Positive earth?
« Reply #8 on: 25.03. 2013 12:22 »
On magneto bikes I use 3 fuses,
Both sides of the battery & the power wire from the regulator ( the one that goes to the ammeter ).
I also use blade fuses and despt beint told that they are not waterproof and will fail, Some of the bikes I did have been running over 20 years with no problems.
Bike Beesa
Trevor