Wants to buy a piece of the frame and engine cases.

[tv175]

Does anyone have such a bad frame, from which could sell some pieces shown in the picture, where the rear footrests are located? Or otherwise, has someone possibility to manufacture these pieces? But unfortunately I don't have a model..
These such was for sale a few months ago in Ebay, but then I didn't knew that I'll need these.
Damn...

Does anyone have such a bad engine case, where could remove these pieces which appear in the picture?

These pictures are from internet, not from me.
cheers Tapani

[chaterlea25]

Hi Tapani,
Where are you located?
I have a scrap drive side case that the piece could be cut from
Yours for the cost of postage
HTH
John

[Stephen Foster]

Following "Chaterlea"s generous offer Tapani , I would also be interested in knowing Your location as I was going to suggest the case could be easily repaired by welding ?

[tv175]

Hi John and Stephen!
And thanks for answers. I'm from Finland and of course I'd pay the postage costs and some for the part, naturally.
John; Could you pls send me the sum and Your account number (IBAN and BIC) for payment to my privat message.
Stephen: I was going to repaired it by welding but ex owner had lost the the detached piece.
Merry Xmas and best regards from FInland,
Tapani

[Stephen Foster]

HI Tapani ,

You dont need the piece .
Either build up the area with T.I.G weld or cut out a block of aluminium slightly oversize , prep it away , weld it in then re-machine the area .

Sent You a P.M .

Steve ...

[A10 JWO]

If you do get an old frame, I need a right hand lug that welds onto the frame that holds the centre stand on and the side stand lug.. Mine must have been torn off at some stage. Will pay for your trouble. Merry xmas.

regards Colin