Wanted A7 Crank

[Mosin]

Does anybody have one? Mine has snapped. Heartbreaking.

Thanks in anticipation.

Simon

[Mosin]

Update. I've just spoken to Rob Wardle who has stripped my engine this morning. It now turns out that I need a new crank, a new set of con rods and a new set of cases.

I am speechless.

[muskrat]

 BUGGA, what happened mate? I've had a couple let go, lucky you don't need barrels as well.
Good luck in your hunt for bits.
Cheers

[Mosin]

Riding along nice as pie and the crank just snapped in half. Luckily I was only doing about 30mph so I just pulled the clutch in and coasted to a halt. Un-luckily, the break had utterly destroyed the con rods, crank and also the cases. The barrels and pistons etc do seem to be ok, but it's just sole destroying after all the time and effort I have put into getting that bike right over the past few years.

[muskrat]

 I know that feeling, then I turn it into motivation to build a better one. Was the crank ground recently? Might be easier to turn it into an A10 with LJ crank and TF barrels. I modified the SS head to suit.
Cheers

[wilko]

Check the broken one for incorrect grind radius.

[duTch]

Happened to me too, same deal, that was the crank that came out of the engine I now have, in another bike to keep it going back in the 70's-

[Andyhosie]

Hi mate, i have one but im in melbourne australia
Cheers
Andy

[Mosin]

The way things are currently looking I might be taking you up on your one in Melbourne Andy. I am not having any success anywhere closer!

[chaterlea25]

Hi Simon,
Have you tried
http://www.owensmotorcycles.co.uk/Index.html
I have a pair of A10 cases that are not in too bad a shape, But again I'm in Ireland

HTH
John

[Mosin]

Cheers John, I've dropped them an email to see if they can help. Just out of interest, are A10 and A7 cases exactly the same?

Thanks,

Simon

[trevinoz]

Except for the engine number. 

Trev.

[kiwipom]

hi guys/Mosin, domiracer.com have them,cheers

[Loonytunes]

Hello Simon

Bad luck with the blow up. I have a spare pair of A7 crankcases if you are still looking. The only problem is I am in New Zealand but no problem to ship them if required. Regards JC

[JulianM]

Hi Simon,

I will have a spare A10 big journal crank going as soon as I have my new crank finished, If you need it then your name is on it.  Free if you use it!
I can even deliver it pretty close to most places in central and lower England free.

Regards,
Julian