WTB footpeg nut

[WozzA]

Wanted to buy the nut that holds the foot pegs onto the footrest stud...
or help identifying the thread ..
I think it's a 7/16" fine thread?  possibly Cycle thread   ????

[duTch]

If it's 7/16"Cycle (BSC) that's same as 7/16" UNF, however if it's left hand thread

[Beezageezauk]

Hi WozzA,

From your description I presume that the bike is a Plunger Framed model.

If so the nut for the left footrest is indeed 7/16 dia X 20 TPI and a left hand thread.   Part number 67-4856.
The nut for the right footrest is the same thread but a right hand thread.  Part number 67-4852.

The original nut for the swinging arm model (just in case I presumed wrong) is 1/2 inch dia X 20 TPI right hand cycle thread and part number 42-4841.

If you have difficulty getting a nut in Oz check out www.draganfly.co.uk who appear to have them in stock.

67-4856  @ £3.60 each
67-4852  @ £3.03 each
42-4841  @ £1.86 each

plus postage.


All the best,

Beezageezauk

[WozzA]

Ahhhhh..... my bad...  I should have mentioned it's a swing arm model,
Thanks Dutch & Beezageezauk...  @ least now I know what I'm looking for.. 

[Russ]

Wozza,  I bought nuts for my Plunger at Modak's.  They had one sitting on the counter, under some other stuff, and told me to come back in 20 minutes and they would find the other one. Buggered if I know how they find stuff in that shop! Sure enough 20 minutes latter they had them both.  Not cheap though. They may have what you need.
Russ

[WozzA]

Thanx Russ..  I'm missing a front axle nut for the Ariel wheel also...
I'll give them a ring..