« previous next »
Pages: [1]   Go Down

Author Topic: Chrome/stainless fork seal holders. Which ones are best  (Read 981 times)

Offline vagabond

  • DAVE VAGABOND HUBBARD
  • A's Good Friend
  • ***
  • Join Date: Nov 2011
  • Posts: 62
  • Karma: 0
  • 1955 GOLDEN FLASH
Chrome/stainless fork seal holders. Which ones are best
« on: 09.01. 2012 23:20 »
which are the best fork seal holders to fit.
stainless or chrome?
The first job i will be doing on the 55 flash is the fork seal holders and also the rear plungers. I will also be ordering replacements for the 1950 plunger project and my brothers 49 A7.
WHICH IS BEST AND WHO WOULD YOU RECOMEND TO GET THEM FROM.
Dave
  
Logged
A10 1955 GOLDEN FLASH unrestored & original gold
PANTHER 1953 100R basket case & bits wanted
2 X 1953 VAUXHALL VAGABONDS projects
1954 VAUXHALL VELOX project

Online Ted_Flash

  • A's Good Friend
  • ***
  • Join Date: Oct 2011
  • Posts: 118
  • Karma: 4
Re: Chrome/stainless fork seal holders. Which ones are best
« Reply #1 on: 10.01. 2012 07:47 »
Dave,

I have stainless covers/holders both front and rear. The stainless plunger covers came from Will Horgan (0208 751 1931) quite expensive but I couldn't find any alternate supplier.

When I built the bike (2003) I fitted chromed plunger covers but within 8000 miles a couple of them had rotted into holes.  Eventually they started squirting grease onto the back tyre when hitting bumps so I changed them...  The good thing about stainless is that you can use the bike in winter without having to hose the salt off when you get home at midnight.  (Or that would be the case if the fool hadn't fitted alloy guards and rims)

Cheers,

Ted
Logged
Ted Wilkinson, Ramsbottom, Lancashire
1950 Golden Flash

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: Chrome/stainless fork seal holders. Which ones are best
« Reply #2 on: 10.01. 2012 09:29 »
I like stainless and the difference in price is not to huge, nothing more annoying than fitting nice new chrome ones and then finding they've rubbed through after less than 1K, which begs the question regarding alignment, must be an answer to this ?
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1978
  • Karma: 17
Re: Chrome/stainless fork seal holders. Which ones are best
« Reply #3 on: 10.01. 2012 09:58 »
I'd be interested in any tips ref alignment and straightening the spring cover tubes

The stanchions were bent on my A10 project- only circa 8mm - but seemingly enough to cause rubbing on the seal holders now the stanchions are straight....
Logged
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4156
  • Karma: 54
Re: Chrome/stainless fork seal holders. Which ones are best
« Reply #4 on: 10.01. 2012 19:38 »
Hi Dave
I can recommend Stainless fork seal holders from, http://www.barleycorn.co.uk/

HTH
John O R
Logged
1961 Super Rocket
1963 RGS (ongoing)
Pages: [1]   Go Up
« previous next »