Author Topic: clutch and primary chain  (Read 944 times)

Offline bluejay

  • Active
  • *
  • Join Date: Jun 2011
  • Posts: 5
  • Karma: 0
clutch and primary chain
« on: 14.06. 2011 21:23 »
I have a 1953 A-10 Golden Flash plunger, the primary chain is a triplex type and the clutch can only take 4 friction and 4 plain type plates, it has 6 bolts springs and cups , I didnt have any problem putting it together using new plates and chain along time ago. These dont match the 1949 to 53 model A BSA spares book I dont know if I have an orphan A-10 or someone has modified it sometime before I got a hold of it. I am not sure, but I seem to remember reading some where, BSA exported this type to north american market. Does anybody out there know anything about this?    thanks,     Jim.   

Online trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3234
  • Karma: 71
Re: clutch and primary chain
« Reply #1 on: 14.06. 2011 21:54 »
Jim,
         The triplex primary was used on the Super Flash and also, I believe, some of the US export bikes.
I had an engine sprocket which was on a BA10 bottom end but have given it away.
   Trev.
 

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: clutch and primary chain
« Reply #2 on: 15.06. 2011 07:59 »
Learn something every day. I thought the triplex was only on the A50/65's
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7