« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Super rocket exhaust  (Read 8034 times)

Offline LJ.

  • Peterborough UK.
  • Wise & Enlightened
  • *
  • Join Date: Jun 2006
  • Posts: 1403
  • Karma: 15
  • The Red A10!
    • LJ's Website!
Re: Super rocket exhaust
« Reply #30 on: 02.01. 2010 19:48 »
Hey good to hear from you Chris! Some good A10s on ebay currently!  ;) So who had your superb A10? I bet you are missing it badly.
Logged
Ride Safely Lads! LJ.
**********************
1940 BSA M20 500cc Girder/Rigid- (SOLD)
1947 BSA M21 600cc Girder/Rigid-Green
1949 BSA A7   500cc Girder/Plunger Star Twin-(SOLD)
1953 BSA B33  500cc Teles/Plunger-Maroon
1961 BSA A10  650cc Golden Flash-Blue
1961 BSA A10  650cc Golden Flash-Red

Offline Chrisf1

  • A's Good Friend
  • ***
  • Join Date: Jun 2008
  • Posts: 96
  • Karma: 0
Re: Super rocket exhaust
« Reply #31 on: 02.01. 2010 21:02 »
Very badly but you only seem to remember the good times the bad were awful Chris
Logged

Offline Rocket Racer

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 1670
  • Karma: 17
  • A kiwi with a racing A10 rig and too many projects
    • NZ Classic Sidecar Racing
Re: Super rocket exhaust
« Reply #32 on: 12.02. 2010 03:27 »
I recently bought a siamese setup for my A10 from Draganfly, while it fitted well and looked good, within minutes of start up the short LH pipe chrome was blistering and blowing off in the breeze. The RH pipe is better although close inspection shows cracks in the chrome. Apparently all caused by the inappropriate use of copper in the plating process. I have advised Draganfly but being on the wrong side of the world a bit difficult to return...
Good news from Draganfly, they will replace the defective parts *beer* *beer*
Logged
A good rider periodically checks all nuts and bolts with a spanner to see that they are tight - Instruction Manual for BSA B series, p46, para 2.
New Zealand
Pages: 1 2 [3]   Go Up
« previous next »