Author Topic: dynamo rotation direction ?  (Read 1127 times)

Offline berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 3184
  • Karma: 20
  • keith.uk 500sscafe.norbsa JDM honda 750fz
Re: dynamo rotation direction ?
« Reply #15 on: 02.04. 2023 20:41 »
Brandis leave the banjo bolts alone, whooops too late, you might get so much oil up there it could cause burning oil problems. a chap who answer questions in classic bike mag in the 1980's told me to leave them alone when i had thoughts of doing the same

Offline Brandis

  • A's Good Friend
  • ***
  • Join Date: Jul 2022
  • Posts: 190
  • Karma: 1
Re: dynamo rotation direction ?
« Reply #16 on: 02.04. 2023 21:06 »
Berger.   My engine, XA7 280, had to be completely dis-assembled at 12K miles.  Based on the reputation of the first 500, I assume it was lubrication.  I found it dis-assembled right down to valve guide removal.  Lubrication has to be pretty shitty to lose your valve guides at that mileage.  I believe those banjo bolts can be had these days so if I've screwed up, I'll get a new set.
It's all an adventure.
47 A7

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3223
  • Karma: 71
Re: dynamo rotation direction ?
« Reply #17 on: 03.04. 2023 22:30 »
Swarfy, there are two length generator chains, from memory, 48 links for 11 tooth and 52 for 13 tooth.
If I find different i will edit.