A10 oil pump spindle

[Stu]

Hi guys, i rebuilt my barnfind 1961 a10 and checked the oil pump, it wasn't turning, lucky I didn't try starting it but I did turn it over a few times before deciding to strip it. I got it turning nicely but I'm worried I damaged the thread on the with
Worm and or spindle. I'll test to see if it turns once I've gotten further, like put the clutch side on so I can turn the engine over with the kick start. My problem is I can't find NOS worm and spindle, guessing they're all gone. Any ideas where I can find these?

[jhg1958]

Stu

My pump was seized too.  I spent ages lapping all the parts together but since it is so important I ended up getting a new pump anyway.

I hope you don't mean the thread on the end of the crankshaft, that would worry me.

The worm is part No. 67-0642
The crankshaft pinion is Part No. 67-0339

Try calling Burton Bike Bits I find they are very good at parts for my A10

John

[RDfella]

When you say 'worm' I presume you mean the part in the oil pump? SRM can supply those.

[muskrat]

G'day Stu.
The only NOS I could find.
NOS worm 67-0642 https://tinyurl.com/3htm33ay or https://pesltd.uk/?ptno=67-0642
NOS drive spindle 67-1389 http://www.klempfsbritishparts.com/GEAR--WORM--OIL-PUMP-DRIVE-3 or https://pesltd.uk/?ptno=67-0642
Cheers