Hi, I’m hoping someone may be able to identify the part pictured below.
My 1957 A10 Plunger Frame bike was in bits when I bought it.
And I mean in bits, totally.
Added to that the previous owner, sadly demised, had other bikes in bits, in the same shed.
They were removed before I bought the plunger.
I’ve been doing dry runs assembling wheel hubs, spacers, dust covers, spindles etc.
I have a 8” half width hub on the front and a QD crinkly hub on the rear.
Everything seems ok except I have the part shown below left over.
I’ve searched through Draganfly’s parts illustrations but the nearest I can find is a felt retaining cap ( 67-5888 ) from a 7” Half Width Hub.
Buy mine is definitely 8”, it also has torque are that the 7” does not.
Any help will be greatly appreciated.
Steve.