Author Topic: kickstart Pinion (Read 501 times)

Roger (Doomtrainbarx) · « **on:** 20.07. 2020 12:03 »

Can anybody help me out with a kickstart pinion please (1962 Super Rocket) - it seems there is a shortage from all the usual dealers ?

berger · « **Reply #1 on:** 20.07. 2020 13:56 »

yes I have a few but all been used before and kept hanging about in boxes

Roger (Doomtrainbarx) · « **Reply #2 on:** 20.07. 2020 14:38 »

Could I buy one from you ?

berger · « **Reply #3 on:** 20.07. 2020 19:04 »

yes are your kickstart teeth pointy or flat topped?

Roger (Doomtrainbarx) · « **Reply #4 on:** 20.07. 2020 19:51 »

yes are your kickstart teeth pointy or flat topped?

I don't know because I haven't got one at all, but looking at the quadrant ,I'd say they were pointy teeth - would you agree ?

berger · « **Reply #5 on:** 20.07. 2020 19:59 »

yes so have you got the ratchet for the pinion and the lock washer and nut, and the spring and brass bush and the hardened steel washer?

Roger (Doomtrainbarx) · « **Reply #6 on:** 20.07. 2020 20:05 »

Yep, I got all those from Draganfly on Saturday - it's just the pinion I need, then the G/box is complete and ready to fit.

berger · « **Reply #7 on:** 20.07. 2020 20:12 »

sending pm