Author Topic: Gear lever replacement  (Read 1146 times)

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Gear lever replacement
« on: 21.08. 2009 02:25 »
G'day all,
             Went for a 200 mile ride on the '51 on Sunday and lost the gear lever 100 miles from home. After riding in 4th for about 20 miles and 6 red lights I discovered a 14mm ring spanner fitted at 11 o'clock position got me home. Just thought I'd pass it on
         
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline Daniel Toro (DT)

  • A's Good Friend
  • ***
  • Join Date: Mar 2009
  • Posts: 72
  • Karma: 1
Re: Gear lever replacement
« Reply #1 on: 21.08. 2009 17:58 »
I've lost the lever and did not notice until the red light.

Fortunately my girlfriend who was comming behind me on her motorcycle, saw the
lever and stop to pick up.
After that, I put some nylon clamps and even if the lever get out, will be hanging. hehehe.
-= DT - Loco =-
 -= SombreroS - SP =-
____________________
1950 BSA Golden Flash A10 Plunger 650cc

Offline beezalex

  • North Carolina, USA
  • Valued Contributor
  • ****
  • Join Date: Jan 2008
  • Posts: 374
  • Karma: 4
Re: Gear lever replacement
« Reply #2 on: 21.08. 2009 20:25 »
Hey, I lost my lever within about 100 yards after pulling away from a stop sign.  Searched for hours and never did find it... *problem*  I always keep a small pair of vise grips in my toolbox for such incidents.
Alex

Too many BSA's


Offline dpaddock

  • NC, USA
  • Valued Contributor
  • ****
  • Join Date: Jul 2006
  • Posts: 429
  • Karma: 5
Re: Gear lever replacement
« Reply #3 on: 25.08. 2009 03:13 »
Drill and tap the lever for a small set screw (say, 8-32) below the shaft.

David
David
'57 Spitfire