67-3140 dimensions

[fearie]

Gi!

I can not buy 67-3140. Can you help me with dimensions? Ill make one by my own.

Best regards

[Sav]

https://mikesclassiccyclespares.com/product/67-3140/

[Swarfcut]

 This is just a plain steel thin wall bush, easily made. It sticks out from the face of the cover by 2-3mm and is level with the casting face inside where the selector lever fits. Diameters you can get from your cover casting and gear selector shaft. Another cover complete or a bush from a damaged cover if you can find them are other possible sources.

 Swarfy.

[Sav]

Always nice to see the OP thanking contributors for advice supplied to a request 

[Swarfcut]

Sav.. My fault, as I did not include dimensions. It's 2 cubits long, 10 micron wall thickness, OD same as gap between thumb and forefinger when holding a fine cuban cigar........

[Sav]

Sav.. My fault, as I did not include dimensions. It's 2 cubits long, 10 micron wall thickness, OD same as gap between thumb and forefinger when holding a fine cuban cigar........

That is one long skinny bush!!