Musky, fancy putting my carbs back on after i'v changed the main jets for the correct ones? NOOO i thought so
![bash *bash*](https://www.a7a10.net/forum/Smileys/default/bash.gif)
i look like plugging the heat gun in when they go back on. well urma is not going out anymore this winter so i decided to drain the tank and take the carbs off because she has the wrong main jets for her set up [ too big ] and i had to leave the air filter end cover off so she would go like a nutter bike instead of bogging down at 5000rpm
![problem *problem*](https://www.a7a10.net/forum/Smileys/default/problem.gif)
, my mistake because i didn't realise this JDM bike was jetted differently to all the others with only having access to haynes and clymer manuals that don't touch the JDM bikes set up, also when i set the air screws i set them a tad more open than they should be and it's been a little swine to start in the cold when it's been stood. so there's a couple of things to correct and if i get the chance to nip out again it will be on betsy .
![yeah *yeah*](https://www.a7a10.net/forum/Smileys/default/icon_yeah.gif)