What have you done with your bike/s today?

[LJ.]

An interesting Subject line that could go on for ages because there is always something to tell. So tell us.... What have you done with your bike today? It can be a small job or large, we are just interested to know!

I'll start....

Been touching up the paintwork on my Nutley Blue A10... it looks ten times better!

[Greybeard]

Nuffink today.

[RoyC]

Nout. Cleaned my guitars instead.

[ellis]

Waxed and polished the commando. 

ELLIS

[RogerSB]

Unlocked the shed, wriggled my bike out, put another 2 psi in my front tyre, wriggled it back in and locked the shed again   .

[berger]

 nowt much, went in garage gave her a pat as I went to a shelf and picked stuff up ,locked garage went out in van with stuff.

[Black Sheep]

Replaced the hoses on the 1952 Land Rover following a coolant leak whilst out this morning.

[BigJim]

Popped in for a hello in the garage, quick check of plugs (they same as ever). Check was due to inadvertantly putting in some 2stroke mix on Sat prior to a trip into Wales.

[Colsbeeza]

Checked the Rocker banjo orifices (orifi?). They are 1.14mm, so that is not causing the smoke. Hey, that is smaller than 3/64" ???Took off the tank and rocker covers, carb etc in preparation to study further. Looking at making/buying a leak-down tester. Got to go get my compression tester which is away from home. Also repaired the tailstock of the lathe. Not riding the BSA obviously.
Col

[RichardL]

Goosed by your inquiry, I decided to get busy wth tightening-down the top end to stem the oil leaks. So far, today, just tightened the base nuts, and most of them were dead loose. Rocker box off next/tomorrow. Deadline for getting done is Sunday, for the Norton Owners' Club Vintage Motorcycle Show.

Richard L.

[Peter in Aus]

Rocker boxers seem to be the go? had to take mine off the A10 yesterday to replace the gaskets, flattened it of with thick glass and wet and dry, it was a bit out so hope will fix the leak.

[metalflake11]

Checked everything over after re-assembly following a re-bore. Got rid of that nasty piston slap!

[berger]

i have not been to the pub, I put up with piston slap for a year on one pot after  they got too excited at the engineers , the piston got hammered and what an annoying sound it is TING TING TING TING TING TING , but I felt better when I heard a modern trident ticking over at Newark one day .  sorry back on topic been in garage and guess what ? she got another pat

[Sav]

Getting the trailer and M23 ready for departure to 'The Island' on Sunday.

[terryg]

Absolutely nothing! Owing to being in that awful limbo that is conveyancing.
Workshed all packed up.
House is supposed to be sold but exchange keeps slipping. That would be not so bad BUT currently the completion date is firm!
Character building stuff but I really don't need it.

There must be so many better property transaction processes than the one we suffer in England.