ATD spares

[Worty]

Hi guys.  I've acquired a rather worn ATD which is complete apart from the cupped washer/ring and 'C' ring.  It also needs a new fibre wheel.  What I'm not sure about is the spring arms which seem to have slightly enlarged/worn holes.  There also seems to be a lot of up and down movement, although this doesn't seem to affect the operation of the bob weights.  Should I be concerned?  Do I need to replace the spring arms?  Are they available?
I'm going to attempt a rebuild of the unit myself so does anyone know where I could acquire the spares I need prior to Priory Magnetos (beezermacc) reopening for business in September?  Priory does them at a good price so may wait until then anyway.

Cheers

[Triton Thrasher]

Those arm things are always sloppy, so yours may be normal.

You could make the horseshoe washer out of a washer.

[Worty]

Thanks TT, the spring arms on the existing ATD (on the bike) are a bit sloppy, but not quite as much as the other unit.  I reckon as long as it's functional, it should be ok.

Cheers for the reply.

[Rex]

The C ring etc are available on Ebay (or were, a couple of months ago when I ordered a set) but any mag parts supplier worth his salt should have them.

Try these people-
https://www.ebay.co.uk/itm/TRIUMPH-NORTON-BSA-LUCAS-MAGNETO-ATD-CENTRE-NUT-C-WASHER-K1F-K2F-LU-498131/352356765668?hash=item520a198fe4:g:Os8AAOSwrjZa~Cki

[Worty]

Thanks Rex, I'll check it out!