Author Topic: AMAL 376 Float Needle seat question.  (Read 6860 times)

Offline Josh Cox

  • Valued Contributor
  • ****
  • Join Date: Apr 2009
  • Posts: 275
  • Karma: 0
Re: AMAL 376 Float Needle seat question.
« Reply #15 on: 08.07. 2009 17:08 »
Hello,
 
Thanks you for your response, so how do I tell whether the washer is needed or not by looking at the carby body ?
 
Josh

Dear Sir,

The new Monoblocs use the thinner "Mark 1 Concentric" O ring, and have a recess machined into the platform on the top of the float chamber to take the washer. Once the washer is in the recess and the seat tightened it should sit flush with the surface of the platform, bringing the location of the seat into the same position as the originals 

Kind Regards,

Customer Services
Black 1953 Golden Flash Plunger