I am fitting a A65 front wheel TLS to my A7.Are the front wheel spindles from A7/A10 and A65/A75 the same dimensions ?I have to change the bearings in my TLS wheel but I don't want to do this if I have to knock them out again to fit a A7/A10 spindle.Roy.
Same bearings.Hub and brake will fit and A10 spindle will fit.Photo, taken about 25 years ago, shows an A10 of mine with flanged hub, TLS, A10 forks and spindle. You can just about make out the built up bit on the brake plate to give engagement.
RoyThere are 2 different A65 spindles - one for 1968 and the other for 1969/70. I dont think the later is the right length for the A10 setup, it is a bit longer, the forks are a bit different.
This is the one that I have, it's 7½" long.