Wanted: Lucas E3L Dynamo

[taylor1960]

Hi all im on the look out for a dynamo for my  1960 650 A10 need a complete unite
 any one have a spare i cant even get one on flee bay, have bid on a few and pippd @ the post 

[beezermacc]

Do you want 6v or 12v. I have a 12v recon'd unit on the shelf.

[taylor1960]

How much ? i only have bits of one :-)

[taylor1960]

Sorry yea happy with 12volt :-)

[beezermacc]

I've sent you a PM. Hope this helps.

[taylor1960]

Still no luck its a lucas e3l dynamo im after at this stage a fixier up will do 

[Joolstacho]

I have an E3L for a BSA twin which I want to swap for am E3L for a Velocette. Drive end covers differ I think, not sure about the taper I need to check it out.
Mine would need fettling, it's missing the long 'through' screws and that tin commutator cover, must dig it out and see.

[taylor1960]

Thanks there getn harder to get i just have to keep look

[Andyhosie]

I have some, I'll check them out. Do you want one with the year stamped on it ?
Cheers
Andy

[taylor1960]

It dont matter to me my bikes far from concours 

[taylor1960]

Might be sorted got bits from a mate and new bearings bolts and brushes of ebay so give it a go first thanks for all your help 

[taylor1960]

Bit of paint dose the trick

[duTch]

 now that you've nicely painted it, you'll need to ensure that it has a good Earth connection

[Rgs-Bill]

  You might want to be careful about the dyno heat build up if a lot of paint was put on the dyno, especially on really long jaunts. Especially if the summer temperatures are up higher.

      RGS-BILL

[taylor1960]

Ha a very hot day here is 22c