Hi,
I have for sale a crankshaft for A10 with big journal bearings. It has been running recently and bearings are at 20thou level so plenty of room for further updates.
This was running in my A7ST which a previous owner had changed to A10 spec with crank and rods etc. As the A7 is a 1952 model I am in process of returning it to the correct spec. Therefore I now have the old crank for sale .
Conrods have 532 stamped on them and part no67-270R27.
Reasonable offers considered for either just the crank and or the rods. I have some photos if you are interested which I can message you. I have tried uploading them, but as they are 2mb then 100% too big to load here.
Barrels, pistons etc will also be available shortly.
Can also do a valanced front mudguard (plunger) and flash plunger petrol tank for sale. These have both been hand painted(!)
Based in Norfolk if you want to view, but happy to give photos as necessary.
Richard