Author Topic: side stand warning light  (Read 3596 times)

Offline nimrod650

  • Valued Contributor
  • ****
  • Join Date: Feb 2015
  • Posts: 446
  • Karma: 4
side stand warning light
« on: 15.01. 2016 19:41 »
has anyone found the need for a side stand warning light i have brake light switch to prop stand and mag cut out wont start if  its down

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: side stand warning light
« Reply #1 on: 16.01. 2016 04:18 »
So what if you want to start the bike and let it warm up while you put the riding gear on? And when you've been at the pub for a few hours, much safer to kick her while on the side stand with a wobbly boot!!
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline Peter in Aus

  • Valued Contributor
  • ****
  • Join Date: Feb 2014
  • Posts: 431
  • Karma: 2
  • South West, West Australia
Re: side stand warning light
« Reply #2 on: 16.01. 2016 09:24 »
Sounds like a good idea to me and if u have had a few beers u should not be on the bike!

Busselton West Australia
49 A7 longstroke
58 A10  SA

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: side stand warning light
« Reply #3 on: 16.01. 2016 09:37 »
Yes I (and others) wonder how I've survived so long!! *bash* *beer* *bash* *beer* *bash*
I was pulled over by a cop on a BMW for about a dozen defects. He didn't book me but shook his head saying it (Suzuki 250 twin 2 stroke) was a death trap. He mounted his bike and turned left 50 yards up the road and pole volted to the ground. *wave* as I rode past. Yes we've all done it, haven't we?
As we all get older it is easier to kick start'em on the side stand.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1977
  • Karma: 17
Re: side stand warning light
« Reply #4 on: 16.01. 2016 09:47 »
My modern triumph  *pull hair out* has all the mod cons including engine cut out when the stand is down and gear engaged .....and yes it has saved me a few times......so of course these things are useful! But I don't have a side stand on my a10....but if you have.....yes it would be useful........
New Zealand

1956 A10 Golden Flash  (1st finished project)
1949 B31 rigid “400cc”  (2nd finished project)
1968 B44 Victor Special (3rd finished project)
2001 GL1800 Goldwing, well, the wife likes it
2009 KTM 990 Adventure, cos it’s 100% nuts

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1996
  • Karma: 23
Re: side stand warning light
« Reply #5 on: 16.01. 2016 13:05 »
You will not notice the warning light when it matters.

The cut-out connection is a gimmick which can stop your engine. The fewer of them you have, the better.

Offline nimrod650

  • Valued Contributor
  • ****
  • Join Date: Feb 2015
  • Posts: 446
  • Karma: 4
Re: side stand warning light
« Reply #6 on: 16.01. 2016 18:33 »
You will not notice the warning light when it matters.

The cut-out connection is a gimmick which can stop your engine. The fewer of them you have, the better.
if the prop stand came down for any reason while riding i would want it to stop the engine

Offline nimrod650

  • Valued Contributor
  • ****
  • Join Date: Feb 2015
  • Posts: 446
  • Karma: 4
Re: side stand warning light
« Reply #7 on: 16.01. 2016 18:44 »
You will not notice the warning light when it matters.

The cut-out connection is a gimmick which can stop your engine. The fewer of them you have, the better.
i wonder why all new bikes have to have them ??

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: side stand warning light
« Reply #8 on: 16.01. 2016 19:34 »
Not a problem with a button start. Honda Leadwings have an airbag, do we want one of those too!!
Starting my 10.5:1 cafe without support is very difficult.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline nimrod650

  • Valued Contributor
  • ****
  • Join Date: Feb 2015
  • Posts: 446
  • Karma: 4
Re: side stand warning light
« Reply #9 on: 16.01. 2016 20:46 »
Not a problem with a button start. Honda Leadwings have an airbag, do we want one of those too!!
Starting my 10.5:1 cafe without support is very difficult.
Cheers
an air bag handy if you fall off leaving the pub?cheers

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1996
  • Karma: 23
Re: side stand warning light
« Reply #10 on: 16.01. 2016 22:52 »
i wonder why all new bikes have to have them ??
[/quote]

At a quick guess- because of some stupid regulation in California?

Maybe you haven't heard how much trouble those switches cause.

All I'm doing is stating my opinion. I'm not particularly trying to persuade you of anything. Feel free to have some other opinion and infest your bike with interlocks.

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3230
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: side stand warning light
« Reply #11 on: 17.01. 2016 12:53 »
Have survived the forgotten side stand a few times, only luck. Just a switch to a bright red light (or horn!) would be fine (circuit connected trough some compression switch under the seat (as seen on car seat passenger side regarding airbag :O)

The T900 I had did 'warn' about sidestand down by cutting the ignition when put into gear.


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline metalflake11

  • Resident Legend
  • *****
  • Join Date: Aug 2012
  • Posts: 678
  • Karma: 9
Re: side stand warning light
« Reply #12 on: 17.01. 2016 14:38 »
i wonder why all new bikes have to have them ??

At a quick guess- because of some stupid regulation in California?

Maybe you haven't heard how much trouble those switches cause.

All I'm doing is stating my opinion. I'm not particularly trying to persuade you of anything. Feel free to have some other opinion and infest your bike with interlocks.
[/quote]

Trying to get to the outside lane on a motorway split, a mates engine cut out due to one. He nearly copped an articulated lorry up his rear. Six months later another 'failsafe' switch caused an intermittent shutting down of the ignition..........He got rid!
File with anti wet sump valves.
England N.W
1960 A10
England

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3230
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: side stand warning light
« Reply #13 on: 17.01. 2016 14:50 »
Trying to get to the outside lane on a motorway split, a mates engine cut out due to one. He nearly copped an articulated lorry up his rear. Six months later another 'failsafe' switch caused an intermittent shutting down of the ignition..........He got rid!  File with anti wet sump valves.

That's why I mentionned red warning light, not ignition related. Or connect to horn :O)


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline metalflake11

  • Resident Legend
  • *****
  • Join Date: Aug 2012
  • Posts: 678
  • Karma: 9
Re: side stand warning light
« Reply #14 on: 17.01. 2016 16:49 »
Trying to get to the outside lane on a motorway split, a mates engine cut out due to one. He nearly copped an articulated lorry up his rear. Six months later another 'failsafe' switch caused an intermittent shutting down of the ignition..........He got rid!  File with anti wet sump valves.

That's why I mentioned red warning light, not ignition related. Or connect to horn :O)

Certainly a lot safer!........... The incident I mentioned was on a modern bike, and the switch was factory fitted. The sidestand was up, but the switch failed.
England N.W
1960 A10
England