« previous next »
Pages: [1]   Go Down

Author Topic: sump plate  (Read 945 times)

Offline Happy Hans

  • Moving Up
  • **
  • Join Date: Oct 2015
  • Posts: 43
  • Karma: 1
sump plate
« on: 02.04. 2016 07:17 »
Hi gents,
I have a question about the sump plate studs from my 54 A10 engine. There are two different threads and I need to know if the stud at the crankcase side (1/4"x20tpi) is a BSW or a UNC thread. I need the info because I want to order the correct taps to renew the threads.

Thanks, Hans.
Logged

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: sump plate
« Reply #1 on: 02.04. 2016 07:57 »
 No UNF/UNC on A10's; Should be WW, now go wash your mouth out *eek*

 ( different angles, and except 1/2" Same pitch)
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline Joolstacho

  • Wise & Enlightened
  • *
  • Join Date: Jan 2010
  • Posts: 1190
  • Karma: 7
Re: sump plate
« Reply #2 on: 02.04. 2016 08:37 »
Absolutely, none of this US UNC rubbish, it's Whitty or die!!!!
Logged

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3226
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: sump plate
« Reply #3 on: 02.04. 2016 10:08 »
1\4 BSW 20 tap here
Logged


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1481
  • Karma: 18
  • Melbourne Australia
Re: sump plate
« Reply #4 on: 02.04. 2016 10:26 »
If all else fails... use this guide..    *whistle*
Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11043
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: sump plate
« Reply #5 on: 02.04. 2016 11:03 »
Studs
 31-0222      STUD      BSW/BSF      1/4"-20-26x7/8"      SUMP
Now I'm not sure it's right. I thought it should be BSW/CEI  Both are 26 tpi but CEI is 60 deg and BSF is 55 deg *dunno*
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline Happy Hans

  • Moving Up
  • **
  • Join Date: Oct 2015
  • Posts: 43
  • Karma: 1
Re: sump plate
« Reply #6 on: 02.04. 2016 14:42 »
Oh I think I stumbled in a bee nest downunder.
Thanks to a10gf for that input. I was not shure because of the different degrees which the threads have.
Now I will use BSW for the rest of my life.

Hans.
Logged

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6480
  • Karma: 55
Re: sump plate
« Reply #7 on: 02.04. 2016 15:28 »
Quote from: Joolstacho on 02.04. 2016 08:37
Absolutely, none of this US UNC rubbish, it's Whitty or die!!!!

...and we note that our venerable Whitworth is gauged in imperial dimensions, not that silly metric.  ;) *smile*

Richard L.
Logged

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: sump plate
« Reply #8 on: 02.04. 2016 15:49 »

 Same topic, but slightly off-thread (no pun intended *smile*), just while I think of it to save looking for the right topic/thread (*conf*), today whilst cleaning up a gearbox outer cover, I remembered that in addition to the clutch pushrod inspection cover screws being I guess BSC * citation needed, the screw that holds the kickstart spring is also BSC * citation needed.
Logged
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: sump plate
« Reply #9 on: 04.04. 2016 13:52 »
Now I think it was about 10 years ago the Stainless Fasteners did their compilation of BSA threads.
Any one of you who do not have a copy should hang your heads in shame, sell you BSa to some one who will really cherish and go ride the Bridgestone 100 you deserve.
http://stainlessbits.com/link12.html *bash*
Logged
Bike Beesa
Trevor

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11043
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: sump plate
« Reply #10 on: 04.04. 2016 20:47 »
That's the page I got my info from Trevor. I use that page regularly.
"Bridgestone 100" I wish, my second bike was a Tas Tora 60.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7
Pages: [1]   Go Up
« previous next »