Author Topic: Long stroke push rods  (Read 839 times)

Offline Drew Back

  • A's Good Friend
  • ***
  • Join Date: Jun 2014
  • Posts: 172
  • Karma: 0
Long stroke push rods
« on: 28.11. 2014 19:11 »
Does anyone know where you can get the pushrods for a long stroke motor..No one seems to have any that I can find I have been combing ebay for months with no luck even dragan fly does not have any listed..Why do these seem to be so rare??

Offline juanfespi

  • Active
  • *
  • Join Date: May 2014
  • Posts: 8
  • Karma: 0
Re: Long stroke push rods
« Reply #1 on: 02.12. 2014 20:32 »
hi i have the same problem as you, I can't found it but here attach one picture and the side.
 The long ones are 205mm and the short 180mm
BSA A7 1948 LongStroke Rigid Frame

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11048
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Long stroke push rods
« Reply #2 on: 03.12. 2014 07:49 »
Thanks for that info Juan. But to clarify is that from the tip of the ball end to the edge of the cup or the bottom of the cup?
If I couldn't find any I'd rummage the local engine re-conditioners bin to find rods with a cup end the right size and marry it to a short stroke rod.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7