GF Plunger rear hub dust cover

[tomtit]

Looking for rear hub dust cover P/N 67-6128 for my GF plunger if anyone has a spare lying around gathering dust. 

Cheers
Tom

[Clive54bsa]

Does it look like this?

[Clive54bsa]

Or this?

Clive

[duTch]

 I say it's a two piece one that resembles the first one, but would need to see the other side...
Same as mine, but I only have the inner(more important) bit

[tomtit]

Hi Clive, the first photo looks like the one in the parts book. I am attaching photos of the cover.
Cheers
Tom

[a10 gf]

^^^  that one is the same I got on my plunger (& like picture in the 1st of Clive54bsa posts).

(& fixed the picture in the post, remember you can edit posts).

[duTch]

 Tom, I'm a little confused- are you looking for one, or have you found one for sale, that you're showing pictures of for confirmation...?
 If the latter, maybe others might like to know the source if there's more..?
 As A10gf says that looks like the one you need and that I only have the inner piece of.

[Clive54bsa]

Tom, Here's the back side of the 1st picture I posted.
Clive

[tomtit]

Clive that looks like it OK, I am going by the part number and diagram in the parts book.

Dutch, I was hoping somebody might have an old one lying around spare that they did not need and possibly donate or maybe I have something I can swap. I'm not being tight arsed but haven't worked in the past 16 months (not for the want of trying, but when you get to your 60's no one wants to know) and don't receive any benefits whatsoever even though I have never been idle for 46 years so scraping the pennies or cents so to speak. The photo is from British spares in Austria for 18 euros which is OK but with postage it can rise to whatever.

Tom

[duTch]

 Ok, I'm hearin' you- I may be wrong, but I think a lot be mangled on removal, the outer is ripped away to get at the inner if it's tight on the hub...only spot welded though.

 I'll keep an eye out at the next local swappie in a couple of weeks if I get there..

[tomtit]

Thanks Dutch, appreciate the help...have a good one.

Tom