« previous next »
Pages: [1]   Go Down

Author Topic: Braces across the rocker boxes ?  (Read 1262 times)

Offline Stephen Foster

  • Resident Legend
  • *****
  • Join Date: Sep 2011
  • Posts: 533
  • Karma: 5
Braces across the rocker boxes ?
« on: 22.05. 2014 10:12 »
Wonder if Anyone can help ..should the longstroke A7 have braces across the two rocker box halves please ?
If so has Anyone a sketch , etc I could work from to make Myself a set ?

At the moment My "Star Twin" does not have these but reading the handbook they are mentioned ?
Logged
I own a 1955/56 B.S.A Swinging Arm "Golden Flash" , had it since 1976 .

Online Brian

  • Wise & Enlightened
  • *
  • Join Date: May 2007
  • Posts: 1820
  • Karma: 43
  • Mt Gambier, South Australia.
Re: Braces across the rocker boxes ?
« Reply #1 on: 22.05. 2014 10:38 »
Here's a scan from the parts book Steve, part no 67-63. Just two bits of flat steel by the looks of it.
Logged

Offline Stephen Foster

  • Resident Legend
  • *****
  • Join Date: Sep 2011
  • Posts: 533
  • Karma: 5
Re: Braces across the rocker boxes ?
« Reply #2 on: 22.05. 2014 18:29 »
Thanks Brian ..thats exactly what they are going to be very soon !
Logged
I own a 1955/56 B.S.A Swinging Arm "Golden Flash" , had it since 1976 .

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3226
  • Karma: 71
Re: Braces across the rocker boxes ?
« Reply #3 on: 22.05. 2014 22:58 »
Steve,
                The braces are approx. 2.5" long with radiused ends, 0.750" wide and measure 0.088" thick, but that is with chrome plating. I would make them from 2mm steel if available. Maybe 20mm x 2mm.

Trev.
Logged

Offline Stephen Foster

  • Resident Legend
  • *****
  • Join Date: Sep 2011
  • Posts: 533
  • Karma: 5
Re: Braces across the rocker boxes ?
« Reply #4 on: 24.05. 2014 07:33 »
Thanks Trev .
I will be using 2mm Stainless Steel most likely .
Logged
I own a 1955/56 B.S.A Swinging Arm "Golden Flash" , had it since 1976 .

Offline Peter in Aus

  • Valued Contributor
  • ****
  • Join Date: Feb 2014
  • Posts: 431
  • Karma: 2
  • South West, West Australia
Re: Braces across the rocker boxes ?
« Reply #5 on: 24.05. 2014 09:19 »
My A7 longstroke dose not have them I wonder what they are supposed to do! Dose any one know?
Logged

Busselton West Australia
49 A7 longstroke
58 A10  SA

Offline Stephen Foster

  • Resident Legend
  • *****
  • Join Date: Sep 2011
  • Posts: 533
  • Karma: 5
Re: Braces across the rocker boxes ?
« Reply #6 on: 24.05. 2014 10:28 »
Peter ,
I would imagine the braces reduce flexing of the rocker covers ?
One of the more knowledgeable members may be able to enlighten Us ?

I only discovered their existence by chance after reading a parts list recently .

Steve ..
Logged
I own a 1955/56 B.S.A Swinging Arm "Golden Flash" , had it since 1976 .
Pages: [1]   Go Up
« previous next »