« previous next »
Pages: [1]   Go Down

Author Topic: Kick start spring tension  (Read 851 times)

Offline Duncan R

  • Valued Contributor
  • ****
  • Join Date: Sep 2008
  • Posts: 291
  • Karma: 3
Kick start spring tension
« on: 29.02. 2012 16:09 »
Hi All,

Just replacing my kick start quadrant - can any one advice on the spring tension? do I turn the lever through 180 degrees or a whole 360 before locking it on the clutch lever arm? A 360 turn  seems a bit over tensioned.

Many thanks

Duncan
Logged
Anglo - Indian A7SS (Actually is a 650)
Kawasaki ZZR 1100
BMW R80GS
BMW R1100GS

Offline Goldy

  • Warwickshire, England
  • Resident Legend
  • *****
  • Join Date: Dec 2008
  • Posts: 619
  • Karma: 9
Re: Kick start spring tension
« Reply #1 on: 29.02. 2012 17:07 »
If I remember it finds it,s own position when the kickstart teeth are engaged and the anchorage bolt is clear I think that you will find it,s less than 180 degrees. all the best Goldy
Logged
56 A10 Golden Flash - Restore, ride, relive.                                          
56 C12 BSA project ongoing

Offline Duncan R

  • Valued Contributor
  • ****
  • Join Date: Sep 2008
  • Posts: 291
  • Karma: 3
Re: Kick start spring tension
« Reply #2 on: 29.02. 2012 19:40 »
Many thanks Goldy
Logged
Anglo - Indian A7SS (Actually is a 650)
Kawasaki ZZR 1100
BMW R80GS
BMW R1100GS
Pages: [1]   Go Up
« previous next »