Plunger belt drive

[Brian]

Came across this on evil bay. Its the first belt drive set up for the plunger models I have seen. I have no idea who the seller is or the quality of his stuff but it may interest some.

Personally I think the original set up on the plunger models is more than adequate so there is no need for modifications like this.

http://cgi.ebay.com/ebaymotors/BSA-A10-PLUNGER-BELT-DRIVE-KIT-_W0QQcmdZViewItemQQhashZitem2eb276869fQQitemZ200562607775QQptZMotorcyclesQ5fPartsQ5fAccessories

[muskrat]

G'day Brian,
                Yes saw that. I have one of his on the cafe with a sNorton clutch and a friend has one on an Atlas, am very impressed. I also have a belt dyno drive from him as well as a sprocket nut with a seal to eliminate any leaks between the main and counter shafts. John is his name, quite a helpful bloke but will talk the handle of an iron pot.
Cheers

[terryk]

I will stick to the original setup but I cant see any adjusting for this belt it must be under it.

[muskrat]

No adjustment needed, set and forget. Belts run quite loose compared to chains.
Cheers