Author Topic: Wanted Induction Bias Washer in USA  (Read 1050 times)

Offline oldbikerbill

  • Moving Up
  • **
  • Join Date: Aug 2010
  • Posts: 44
  • Karma: 0
  • 1954 Bsa A10 Plunger. Located outside San Diego,
Wanted Induction Bias Washer in USA
« on: 03.08. 2010 22:41 »
Looking for one but can't find a supplier who has one.  PArt 67-359.  Otherwise, can someone who has one measure the one that they have and I can make one.
Bsa A10 Plunger, '72 Moto Guzzi Eldorado,'73 Bmw r75/5

Offline a101960

  • Wise & Enlightened
  • *
  • Join Date: Sep 2007
  • Posts: 1072
  • Karma: 12
  • BSA RGS BSA C12
Re: Wanted Induction Bias Washer in USA
« Reply #1 on: 04.08. 2010 00:48 »
Here is a scan of the anti bias washer (actual size) for a 389 monobloc carb. The thickness is 5mm tapering to 2mm. Hope that helps.

John


Offline oldbikerbill

  • Moving Up
  • **
  • Join Date: Aug 2010
  • Posts: 44
  • Karma: 0
  • 1954 Bsa A10 Plunger. Located outside San Diego,
Re: Wanted Induction Bias Washer in USA
« Reply #2 on: 04.08. 2010 05:17 »
Perfect!  Thanks !
Bsa A10 Plunger, '72 Moto Guzzi Eldorado,'73 Bmw r75/5

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3215
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Wanted Induction Bias Washer in USA
« Reply #3 on: 04.08. 2010 09:44 »
Welcome to the forum. Try a search fro induction bias, lot's of posts to be found. And see Where are you situated? Which bike ?


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline oldbikerbill

  • Moving Up
  • **
  • Join Date: Aug 2010
  • Posts: 44
  • Karma: 0
  • 1954 Bsa A10 Plunger. Located outside San Diego,
Re: Wanted Induction Bias Washer in USA
« Reply #4 on: 04.08. 2010 15:33 »
I just orderred one from Cake Street Classics, nice guy .
Bsa A10 Plunger, '72 Moto Guzzi Eldorado,'73 Bmw r75/5