After 15 years of restoring my 51 A10 Plunger, and recently discovering I had a problem with my fork yokes, as previously posted, I thought nothing else could possibly need fixing.
How wrong I was. For no particular reason I decided to fit the foot rests to the bike. Just to be sure. Right one no problem. Left one however will not go on as the Primary Chain Cover is almost sitting on the foot rest mount. There is insufficient gap to allow the foot rest to fully slide onto the taper.
A quick and very basic measurement shows the left one is 3/16th higher than the right. I assume it has been bent up.
Is anyone able to give a general indication as to how much clearance there is between the Primary cover and foot rest mount.
Any ideas on how to fix / bend? the mount down to give clearance.
Fortunately the bike is still in primer and needs to be dismantled so I'm glad I found it now.
Cheers Russ