View or Hide Header -->
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
A7 & A10 Engine
A7 1946-1950
Gearbox, Clutch, Primary
Frame
Lucas, Ignition, Charging, Electrical
Amal, Carburation
Entire forum
Google
Home
Help
Search
Contact
Login
Register
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Amal, Carburation
»
Fuel tap viton seal
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Fuel tap viton seal (Read 630 times)
greeneunos
Moving Up
Join Date: Aug 2022
Posts: 16
Karma: 0
Fuel tap viton seal
«
on:
02.02. 2024 10:23 »
Hi guys , thanks for all the replies to my previous post , now has anyone sourced a viton seal for this type of tap ? BSA A7 1960 ( I know they are A65 taps )
Cheers Mike
Logged
MikPowl
A's Good Friend
Join Date: Feb 2014
Posts: 65
Karma: 0
Re: Fuel tap viton seal
«
Reply #1 on:
02.02. 2024 10:58 »
Try Googling 'Viton O-rings' - loads of suppliers. You'll need to measure the bore diameter and thickness of the O-ring or groove that it sits in.
Logged
limeyrob
Wise & Enlightened
Join Date: Nov 2023
Posts: 1037
Karma: 4
Re: Fuel tap viton seal
«
Reply #2 on:
02.02. 2024 16:50 »
Last time I needed one I got it off e-bay. Good value and a decent range of sizes. Its probably imperial but there's usually a metric that's close enough. A lot of the metric are imperial (ie 3.3 etc) once you do the conversions.
I've used these guys in the past, reasonable and fast:
https://www.ebay.co.uk/str/sealsrus?_trksid=p4429486.m3561.l2563
Logged
Slough 59 GF/SR
Print
Pages: [
1
]
Go Up
« previous
next »
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Amal, Carburation
»
Fuel tap viton seal