« previous next »
Pages: [1]   Go Down

Author Topic: Clutch locking plate for a plunger  (Read 533 times)

Online spanersc

  • A's Good Friend
  • ***
  • Join Date: Dec 2008
  • Posts: 189
  • Karma: 1
  • Cambridgeshire. UK
Clutch locking plate for a plunger
« on: 03.10. 2018 14:23 »
Hi All.  Does anyone happen to know the part number of a clutch locking plate that would be suitable for a plunger clutch set-up? 
There are plenty advertised for the later S/A type of 6 spring clutch but I cannot find one to suit a plunger listed.
Any help appreciated as always.
Best Regards, Pete
Logged
Peter C    Cambridgeshire. UK   1935 Blue Star. 1936 M23 Empire-Star, 1938 B24 Empire-Star. 1939 M23 Silver-Star. 1950 A7 Rigid.  1952 A7ST.   1953 A10 Super Flash.  1954 A7ST.  1955 A7SS. 1956 A10RR.  1962 RGS.  1962 DBD34

Offline bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: Clutch locking plate for a plunger
« Reply #1 on: 03.10. 2018 17:06 »
If you have some spare plates (old ones are fine) two bolts and nuts and a length of steel, then they are easy to make
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11046
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Clutch locking plate for a plunger
« Reply #2 on: 03.10. 2018 20:54 »
G'day spanersc.
I just put it in gear and lock the rear brake. A rattle gun (air impact driver) works well.
Been meaning to make one for years. Thanks for reminding me Bill.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7
Pages: [1]   Go Up
« previous next »