electronic ignition , which is the best

[peter]

Thank you very much for your information, I think I will install the MTH , I hope it will be fine.
Peter

[orabanda]

I am very happy with the BTH.
I hid the coils under the ski slope. I used a piece of rectangular aluminium bar, drilled a hole through it the same size as the tubing at the back, then split it and bolted (clamped) it to the tube.

[orabanda]

Another pic, showing how the leads from the coil are routed

[peter]

interesting pictures , very useful for me, thanks a lot.
Peter

[peter]

Hi all,
Thanks a lot for your useful advice, but I still owe the end of this dread. I installed the BTH ignition, I mounted the ignition coils in the battery box and the CDI box on the frame. I mounted the Battery in the Toolbox (a little but strong Hawker 6 Volt Battery). I used the existing ignition-gear and blocked his automatic adjustment. Everything was easy and everything works OK.
Greetings Peter

[edboy]

i m using a coil set up but recommend the 12volt armature kit sold on the net and a dvlr reg. it produces the low speed amps you need.