« previous next »
Pages: [1]   Go Down

Author Topic: 276 adjustment screw  (Read 715 times)

Offline WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1481
  • Karma: 18
  • Melbourne Australia
276 adjustment screw
« on: 03.12. 2018 02:05 »
Amal 276 carb...  170 main jet... A10 motor..  with no air filter connected..
Can anyone please advise me on approx how many turns from seated ( all the way in )
should the Air adjustment Screw & spring be turned out  *????*
Cheers..  *smile*
Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11062
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: 276 adjustment screw
« Reply #1 on: 03.12. 2018 07:26 »
G'day Woz.
With any carb I start with 1,1/2 turns out. A colour tune is a big help. I have a spare colour tune you can borrow if you want.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1481
  • Karma: 18
  • Melbourne Australia
Re: 276 adjustment screw
« Reply #2 on: 03.12. 2018 08:30 »
That would be handy mate... BUT hang off for now... & Aus Post is too unreliable  *problem*
I'll try with 1& 1/2 turns for a start, I've put a carb gasket kit through it but it's still leaking,
I might have to bite the bullet & buy another from Fleebay to make up one good one..
Thanks again for the offer.  *clap*
Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"
Pages: [1]   Go Up
« previous next »