Author Topic: Wanted: Plunger a10 front engine brackets  (Read 900 times)

Offline ronnierockets

  • Moving Up
  • **
  • Join Date: Dec 2008
  • Posts: 47
  • Karma: 0
Wanted: Plunger a10 front engine brackets
« on: 16.10. 2017 12:32 »
Wanted for my new project. 
I am looking for a set of front engine plates for a BSA plunger a7/a10
Also a rear brake pedal operating lever.
Can anyone out there help?
Thanks,..Ronnierockets..

adm edit: edited title, see https://www.a7a10.net/forum/index.php?topic=10255.msg75923#msg75923
as the wife says,too many bikes, and only one butt.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Wanted: Plunger a10 front engine brackets
« Reply #1 on: 16.10. 2017 12:51 »
 Can't help with supply, but as far as I can garner there's two lever types ; pre-'53, and post '53 (surprise surprise) which has a pedal stop adjuster.  Do you know what year or don't matter ?
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline ronnierockets

  • Moving Up
  • **
  • Join Date: Dec 2008
  • Posts: 47
  • Karma: 0
Re: Wanted: Plunger a10 front engine brackets
« Reply #2 on: 16.10. 2017 19:30 »
Hi Dutch,
,It doesn't matter what lever type pre 53 or post 53,
As my "Project" is not being built as standard,
Thanks for your reply ,and for pointing out the differences between the levers.
as the wife says,too many bikes, and only one butt.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Wanted: Plunger a10 front engine brackets
« Reply #3 on: 16.10. 2017 22:32 »

 Interestingly the same part # 67-7026 is listed for both types  *conf*
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline a

  • Valued Contributor
  • ****
  • Join Date: Feb 2011
  • Posts: 273
  • Karma: 4
Re: Wanted: Plunger a10 front engine brackets
« Reply #4 on: 17.10. 2017 01:38 »
Hi RonnieRockets,
We have the engine plates https://mikesclassiccyclespares.com/product/67-4171-67-4173/
also have the brake pivot https://mikesclassiccyclespares.com/product/67-7026/
also should have any other parts, and can combine on shipping if need be.
Thanks, Brett

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Wanted: Plunger a10 front engine brackets
« Reply #5 on: 17.10. 2017 02:27 »

 Ronnie, I may have misread that (nothing unusual *conf*); The pedal is # 67-7026, if you want its' mate the pivoting 'operating lever', as in Bretts' photo, according to the parts list, that is # 67-7027
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline a

  • Valued Contributor
  • ****
  • Join Date: Feb 2011
  • Posts: 273
  • Karma: 4
Re: Wanted: Plunger a10 front engine brackets
« Reply #6 on: 17.10. 2017 02:49 »
I may have also ready that incorrectly. Are you after the pedal? the pivot? the brake arm? Do you have a part number needed??
Thanks, Brett.

Offline ronnierockets

  • Moving Up
  • **
  • Join Date: Dec 2008
  • Posts: 47
  • Karma: 0
Re: Wanted: Plunger a10 front engine brackets
« Reply #7 on: 20.10. 2017 19:56 »
Hi Dutch ,and Brett,
Sorry for my late reply,
I,ve found my parts book,
The parts I require are  67-4173 front engine plate complete(offside)
                                  67-4171 front engine plate complete (near side)
                                 672027rear brake pedal operating lever
Brett,the parts in your photos are correct and right,can you pm me with a total inc p+p
To Southern Ireland?
Thanks and best regards..Ronnierockets...
as the wife says,too many bikes, and only one butt.

Offline a

  • Valued Contributor
  • ****
  • Join Date: Feb 2011
  • Posts: 273
  • Karma: 4
Re: Wanted: Plunger a10 front engine brackets
« Reply #8 on: 25.10. 2017 06:12 »
If you go through our website it should tell you a total including shipping for your items at the checkout?