SOLD A10 crankshaft

[Richard A]

Hi,

I have for sale a crankshaft for A10 with big journal bearings. It has been running recently and bearings are at 20thou level so plenty of room for further updates.

This was running in my A7ST which a previous owner had changed to A10 spec with crank and rods etc. As the A7 is a 1952 model I am in process of returning it to the correct spec. Therefore I now have the old crank for sale .

Conrods have 532 stamped on them and part no67-270R27.

Reasonable offers considered for either just the crank and or the rods. I have some photos if you are interested which I can message you. I have tried uploading them, but as they are 2mb then 100% too big to load here.

Barrels, pistons etc will also be available shortly.
Can also do a valanced front mudguard (plunger) and flash plunger petrol tank for sale. These have both been hand painted(!)

Based in Norfolk if you want to view, but happy to give photos as necessary.

Richard

[chaterlea25]

Hi Richard
There are several ways to reduce the picture sizes so they will show on the forum
This is a good one, http://www.faststone.org/FSResizerDetail.htm

What are the drive side splines like on the crank? they are often worn

HTH
John

[Richard A]

John,

they look pretty good

Richard

[Richard A]

Folks,

Crank now sold, so thanks for the interest
Also mudguard sold.

I will post picture (learnt how to now!!) of barrels, pistons and rings soon. Also tank

Richard

[muskrat]

G'day Richard.
Are the barrels thick or thin flange?
Cheers

[Richard A]

Hi,

Barrels not with me at the moment as the guy rebuilding the engine for me has not yet removed the cam followers.
As soon as I have the barrels I will post details

Richard

[Richard A]

Barrels etc now also sold

[edboy]

hi richard, regarding plunger petrol tank= could you email some photos?
yes , i have quite a few bsa s. including plungers.
regards ed