Hello to the forum

[wdgld]

Hi folks, Thanks for adding me to the membership. I recently became the proud owner of a very nice A10, my first BSA. I'm looking forward to covering many happy miles on it, and hopefully (with the help of the forum) making it even better. Here's a couple of pictures of my new baby for you all.

[ellis]

Hi wdgld and welcome to the Forum.

The shortest day has just gone and 2017 is just around the corner, So we will all be kicking our heels for the better weather to come and to start riding again.   

[Greybeard]

 
Beautiful machine!

I see that the front brake lever is not ideal. Should be less than 90° before operation coming to 90° when brake is applied. You should check the linings. If they are ok the lever may not be set correctly

[a10 gf]

Nice ! Thanks for intro post and welcome aboard.

[KiwiGF]

, you have a very good looking bike there 

[chaterlea25]

Hi and Welcome wdgld,
Your A10 looks good ! (+1 0n the front brake arm)
One other thing you may like to correct is that the kickstart cotter pin is fitted wrong way round
The nut end should be in front, this will position the kickstart at a better angle and place the pressure point on the thick end of the cotter

Cheers
John

[wdgld]

Thanks for the heads up on the Brake lever and cotter pin guys. I'll get on it 

[Tomcat]

Welcome aboard WDGLD. Nice Bike, looks like you plan on doing some riding. Always better to buy a going machine than a basket case! Cheers from Down Under.  Tomcat (Peter)