Wanted A7 Plunger Head/barrel/crank

[Richard A]

Folks,

I'm after an A7 crank, barrel and head for my 52 ST plunger. At present I have an A10crank etc installed by previous owner and I'd really like to get it back to standard.
Happy to p/x, buy or just exchange.
Also have an A10 plunger goldflash tank and front valanced mudguard if of interest.

Thanks

Richard

[Bedfordbeeza]

Hi Richard,

I've got a couple of spare cranks and a 0.40 barrel with pistons that came with my 51 plunger as spares. The spigot on the barrel has a chunk missing but is well below the piston travel, and i would need to make sure they are deffo a7 cranks.  I'll take a look this evening and pm you later or tomorrow.

Regards
Tam