Author Topic: Oil Leaking from timing chest  (Read 826 times)

Offline Drew Back

  • A's Good Friend
  • ***
  • Join Date: Jun 2014
  • Posts: 172
  • Karma: 0
Oil Leaking from timing chest
« on: 10.10. 2016 22:11 »
I have now got my long stroke running very good but I have a nasty leak oil coming from bottom of timing cover. Oil return is great to the tank, rocker feed is awesome everything seems to flow normal I ran it without cover and it just totally fills up around oil pump is that supposed to circulate some other place??Could pressure relief valve have anything to do with it I could not get it apart to make sure ball is moving freely??

Offline Klaus

  • Valued Contributor
  • ****
  • Join Date: Jun 2015
  • Posts: 447
  • Karma: 10
Re: Oil Leaking from timing chest
« Reply #1 on: 10.10. 2016 23:38 »
Yes this is normal. The oil comming  out from the timingside bush bearing. You better not run the engineg without the cover otherwise the bush is worn out very quick. If you have a leak the gasket is in bad condition. Also take care in overtighten the four bolts around the oilpump. You can try to stop the leaking with some silicone on the gasket at this area put on both sides of the gasket.

cheers Klaus


If you think, everything is under control, you are not fast enought.

BSA DB34 Goldstar, BSA A10 Road Rocked, BSA A7 Shooting Star, BSA M33, BSA M24, Kawa W650

Offline Drew Back

  • A's Good Friend
  • ***
  • Join Date: Jun 2014
  • Posts: 172
  • Karma: 0
Re: Oil Leaking from timing chest
« Reply #2 on: 11.10. 2016 13:06 »
Gasket was pretty bad and ball was stuck in housing of oil pressure relief valve got it all buttoned up seems like leak slowed down but ran out of gas will have to test ride on weekend. Thank you for input..

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: Oil Leaking from timing chest
« Reply #3 on: 29.01. 2017 12:29 »

 Hey Drew, as previously discussed, the timing chest fills with oil up to the big hole(about 50cc?) in the back behind the oil pump I think Kiwi GF has the Big Pic and thread (one day i'll remember it)
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia