« previous next »
Pages: [1]   Go Down

Author Topic: Cable length  (Read 652 times)

Offline jfligg

  • Valued Contributor
  • ****
  • Join Date: Aug 2006
  • Posts: 268
  • Karma: 1
Cable length
« on: 26.06. 2016 21:40 »
Hi guys after a bit of a lay off I decided to get My A7 out.  It is a 1949 a7 star twin. I am going to use a 626  concentric carb on it.  I was wondering if anyone knows what the gifference between the inner and outer cable is?  All the cables I have in the shop are too short.  I went by the guide lines in the walridge catalogue but 3 9/16 is too short.  Thanks Jeff
Logged

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: Cable length
« Reply #1 on: 28.06. 2016 10:26 »
Not what you are looking for but the differential is the langth of the mixing chamber + the distance from the cable stop to the barrel hole in the twistgrip.
The latter ca vary greatly
Logged
Bike Beesa
Trevor

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 10008
  • Karma: 51
Re: Cable length
« Reply #2 on: 28.06. 2016 10:50 »
Yes, the length of the cable assembly is only important for smooth curves. What counts is the amount of difference in length, hence cable travel.
Logged
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash
Pages: [1]   Go Up
« previous next »