Author Topic: Standard chain sprockets to an 1960 Golden Flash?  (Read 657 times)

Offline FoxDK

  • Moving Up
  • **
  • Join Date: Mar 2014
  • Posts: 42
  • Karma: 0

Hi,

Do any of You know which size of chain sprockets (front and rear), there is standard to an A10 Golden Flash from 1960?

Regards,

Frederik - Denmark

Online Klaus

  • Valued Contributor
  • ****
  • Join Date: Jun 2015
  • Posts: 448
  • Karma: 10
Re: Standard chain sprockets to an 1960 Golden Flash?
« Reply #1 on: 23.09. 2015 17:25 »

Engine        21
clutchh        43
Gearbox      19
Rear wheel  42 (solo)



cheers Klaus


If you think, everything is under control, you are not fast enought.

BSA DB34 Goldstar, BSA A10 Road Rocked, BSA A7 Shooting Star, BSA M33, BSA M24, Kawa W650

Offline FoxDK

  • Moving Up
  • **
  • Join Date: Mar 2014
  • Posts: 42
  • Karma: 0

Offline Rocket Racer

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 1670
  • Karma: 17
  • A kiwi with a racing A10 rig and too many projects
    • NZ Classic Sidecar Racing
Re: Standard chain sprockets to an 1960 Golden Flash?
« Reply #3 on: 29.09. 2015 05:27 »
If both your sprockets are knackered, you might want to fit B series sprockets which can be purchased in the narrower 520, which allows room to fit heavier grade chain. The standard 530 chain doesnt allow much room for stronger grades of chain. I run 520 chain on my race a10
Just a thought.
A good rider periodically checks all nuts and bolts with a spanner to see that they are tight - Instruction Manual for BSA B series, p46, para 2.
New Zealand