« previous next »
Pages: [1]   Go Down

Author Topic: Swaps!  (Read 674 times)

Offline OilySock

  • Active
  • *
  • Join Date: Jun 2011
  • Posts: 8
  • Karma: 0
Swaps!
« on: 10.02. 2014 19:44 »
Hi All,

I'm based near London, UK and I'm after some parts for a '61 A10, primary chaincases, tinware and fork bottoms for a half-width hub mainly.

I've some BSA parts to dispose of, most of which you can see here:

http://s493.photobucket.com/user/RichardCarrigan/library/BikeBits

http://s493.photobucket.com/user/RichardCarrigan/slideshow/BikeBits

I've also a pair of fork legs to out, inc stancions, oil seal holders etc which I haven't yet taken photos of.  I'm a bit baffled by them as they have the two-bolt caps to hold the axle and the oblong block to fit the full-width iron hub but instead of the two studs to hold the mudguard bracket they have the (earlier to my mind) welded on rear-facing tab to take the mudguard stays.  I don't think they're A50/A65 as they don't have provision for the damper rod.  Any ideas ?

Many thanks
Richard
Logged
Kent A10 GF

Online trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3238
  • Karma: 71
Re: Swaps!
« Reply #1 on: 10.02. 2014 20:07 »
Yeah, '58/'59.

Trev.
Logged

Offline lawnmowerman

  • Resident Legend
  • *****
  • Join Date: Dec 2009
  • Posts: 624
  • Karma: 8
  • 1959 Super Rocket. Kent, England
Re: Swaps!
« Reply #2 on: 11.02. 2014 12:26 »
Hi Richard

I may be interested in the fork legs. I will look out for the pics.

Jim
Logged
1959 A10 SR
1938 Wolseley 14/60
1955 Ferguson TEF20 tractor
1965 Ferguson 135 tractor
1952 Matchless G80 rigid
1960 BMW R60
1954 Matchless G80S
1955 Ariel 500 VH
1951 Sunbeam S7DL
1960 Matchless G12 with Watsonian Monza
......and loads of lawnmowers

Too old to Rock and Roll but too young to die  (Jethro Tull 1976)

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1211
  • Karma: 6
Re: Swaps!
« Reply #3 on: 24.02. 2014 16:54 »
 I may  be interested in the headlight shroud and light if it will fit a 58 flash. All I have now is some easyrider 4 inch headlight and wire nuts.
Logged
Central Wisconsin in the U.S.
Pages: [1]   Go Up
« previous next »