« previous next »
Pages: [1]   Go Down

Author Topic: Speedo and Re-counter thread size?  (Read 659 times)

Offline sprint

  • Valued Contributor
  • ****
  • Join Date: Jan 2012
  • Posts: 309
  • Karma: 5
Speedo and Re-counter thread size?
« on: 27.05. 2013 20:19 »
Can somebody please advise what thread size are the fixing studs on the Smiths Chrono Speedo and Rev-counter?
Logged

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4156
  • Karma: 54
Re: Speedo and Re-counter thread size?
« Reply #1 on: 27.05. 2013 21:19 »
Hi Sprint,
They are 0 BA

HTH
John
Logged
1961 Super Rocket
1963 RGS (ongoing)

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3238
  • Karma: 71
Re: Speedo and Re-counter thread size?
« Reply #2 on: 27.05. 2013 22:24 »
Sorry John, but they are 6mm x 1.0mm.
All Chrono threads are metric.
0 BA is also metric and will fit but the angle is different, being 47 degrees instead of 60.

Trev.
Logged

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4156
  • Karma: 54
Re: Speedo and Re-counter thread size?
« Reply #3 on: 27.05. 2013 22:33 »
Hi Trev,
I know the I could not fit 6mm nuts to the speedos I tried ????
I ran a 6mm die down the threads and used SS dome nuts  *eek* *eek*

??????????????
John
Logged
1961 Super Rocket
1963 RGS (ongoing)

Offline sprint

  • Valued Contributor
  • ****
  • Join Date: Jan 2012
  • Posts: 309
  • Karma: 5
Re: Speedo and Re-counter thread size?
« Reply #4 on: 28.05. 2013 17:14 »
Thanks for the replies.

Tried an OBA nut which screwed on but was very loose. Tried a M6 nut which screwed on perfectly.

I have some dome nuts, they will look nice?
Logged
Pages: [1]   Go Up
« previous next »