« previous next »
Pages: [1]   Go Down

Author Topic: 1947/48 drive side engine plate wanted  (Read 1111 times)

Online bikerjohndavies

  • John Davies, Bath, UK
  • Valued Contributor
  • ****
  • Join Date: Jun 2010
  • Posts: 286
  • Karma: 6
  • 1953 BSA A10 Super Flash
1947/48 drive side engine plate wanted
« on: 12.06. 2012 09:05 »
I was wondering if anbody has a 1947/48 long stroke A7 drive side engine plate spare like the one in the picture. If so then please let me know via email or PM. Thanks John
Logged
1931 Ariel VB31, 1935 Triumph 5/3 project, 1946 Ariel Square 4, 1952 Norton Model 7, 1953 BSA A10 Super Flash, 1954 Ariel VH

Offline terryk

  • Valued Contributor
  • ****
  • Join Date: Oct 2006
  • Posts: 460
  • Karma: 3
  • Townsville Queensland Australia
Re: 1947/48 drive side engine plate wanted
« Reply #1 on: 12.06. 2012 13:31 »
I think you sent me one a few years back John thanks. Do you need one now?
Logged
1950-53 A10 rigid/plungers, 1958-61 A10 super rockets, 1947-50 A7 longstrokes, 1949 Star twin,
1951-54 A7 plungers, 1940s M21, WDM20s,
1948-50s B33s rigid/plunger/swingarm, 1948-50s b31s rigid/plunger/swingarm

Online bikerjohndavies

  • John Davies, Bath, UK
  • Valued Contributor
  • ****
  • Join Date: Jun 2010
  • Posts: 286
  • Karma: 6
  • 1953 BSA A10 Super Flash
Re: 1947/48 drive side engine plate wanted
« Reply #2 on: 12.06. 2012 16:07 »
Hi Terry,

Yes, lesson learnt, never sell anything as you may need it yourself one day. There must be some more in the UK out there.
I commented in a post recently that there was a 1953 A7 with a 48 engine sold on Ebay last month. A lot of the parts on the bike were from a 1948 rigid including the QD front wheel and forks, rear mudguard, chain guard, front engine plates etc (I had seen it at an autojumble a couple of months before for sale). I was hoping perhaps the new owner was on the forum and wanted to change to the later dynamo. We could exchange plates as I have a later set.

http://www.ebay.co.uk/itm/280867391371


Cheers, John
Logged
1931 Ariel VB31, 1935 Triumph 5/3 project, 1946 Ariel Square 4, 1952 Norton Model 7, 1953 BSA A10 Super Flash, 1954 Ariel VH

Online bikerjohndavies

  • John Davies, Bath, UK
  • Valued Contributor
  • ****
  • Join Date: Jun 2010
  • Posts: 286
  • Karma: 6
  • 1953 BSA A10 Super Flash
Re: 1947/48 drive side engine plate wanted
« Reply #3 on: 22.06. 2012 09:18 »
Hi guys, there must be a spare one out there somewhere ?
Logged
1931 Ariel VB31, 1935 Triumph 5/3 project, 1946 Ariel Square 4, 1952 Norton Model 7, 1953 BSA A10 Super Flash, 1954 Ariel VH

Online bikerjohndavies

  • John Davies, Bath, UK
  • Valued Contributor
  • ****
  • Join Date: Jun 2010
  • Posts: 286
  • Karma: 6
  • 1953 BSA A10 Super Flash
Re: 1947/48 drive side engine plate wanted
« Reply #4 on: 11.07. 2012 18:27 »
No longer needed as I have sold the bike.
Logged
1931 Ariel VB31, 1935 Triumph 5/3 project, 1946 Ariel Square 4, 1952 Norton Model 7, 1953 BSA A10 Super Flash, 1954 Ariel VH

Online bikerjohndavies

  • John Davies, Bath, UK
  • Valued Contributor
  • ****
  • Join Date: Jun 2010
  • Posts: 286
  • Karma: 6
  • 1953 BSA A10 Super Flash
Re: 1947/48 drive side engine plate wanted
« Reply #5 on: 09.05. 2013 17:07 »
Even though I don't now need one as I sold the 48 project I have got my hands on one via EBay so its going in the stores. The lesson is don't give up looking for a part you need or want, one will turn up in the end. Cheers, John
Logged
1931 Ariel VB31, 1935 Triumph 5/3 project, 1946 Ariel Square 4, 1952 Norton Model 7, 1953 BSA A10 Super Flash, 1954 Ariel VH
Pages: [1]   Go Up
« previous next »