Author Topic: A7 Rigid/Longstroke crank flywheel bolts & sludge trap plugs?  (Read 1331 times)

Offline RoadRunner

  • A's Good Friend
  • ***
  • Join Date: May 2010
  • Posts: 210
  • Karma: 2
  • Thinking Time
Hi,
I've picked up an A7 Longstroke crank (Rigid?) which is missing the 6 flywheel bolts and sludge trap plugs for some reason! Looks like its been taken apart to chrome the flywheel - why, no idea?

Question is does: anyone know where I can source these 6 bolts/nuts and 2 sludge trap plugs?
Are they the same as the A7 plunger crank bolts with the part number 67-301 and sludge trap plug number 65-615?

It's not urgent since this is a seperate project from my A7 plunger but without these bits I'm a bit stuffed. Oh - the crank has been re-ground some time ago with new shells and bush and not been used - so would be a shame not to use it?
If anyone has the correct part numbers that would be a helpful start - couldn't find them on Draganfly's web site.

Cheers
RoadRunner









 

Offline Hubie

  • Dave Huybens
  • Valued Contributor
  • ****
  • Join Date: Feb 2010
  • Posts: 366
  • Karma: 4
I got most of my parts for my rebuild from Draganfly.  Might be worth checking if they have them.

Cheers,
Dave.
1959 BSA Golden Flash
1956 Royal Enfield Super Meteor
1955 Royal Enfield 350 Bullet
2007 Harley Davidson Sportster 1200 Custom

The early bird gets the worm, but the second mouse get's the cheese!