« previous next »
Pages: [1]   Go Down

Author Topic: Air filter connection rubber  (Read 921 times)

Offline Gavin

  • Valued Contributor
  • ****
  • Join Date: Oct 2006
  • Posts: 283
  • Karma: 5
Air filter connection rubber
« on: 23.05. 2011 16:32 »
It has taken me a couple of years to find an A10 air filter connection rubber, from the carby to the Vokes air filter. most listed on ebay fit A7's only. A supplier in the US asked for my A10 boot, and has made a copy of it. If you are chasing this rare creature try the following link

http://cgi.ebay.com/ebaymotors/BSA-A10-650-Pre-Unit-Carb-Air-Filter-Connector-Rubber-/120720680942?pt=Motorcycles_Parts_Accessories&hash=item1c1b8367ee

or go to http://www.claussstudios.com/

I could not have received better or more helpful service from these guys.
Logged

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3243
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Air filter connection rubber
« Reply #1 on: 23.05. 2011 19:49 »
Logged


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline Gavin

  • Valued Contributor
  • ****
  • Join Date: Oct 2006
  • Posts: 283
  • Karma: 5
Re: Air filter connection rubber
« Reply #2 on: 24.05. 2011 10:03 »
Attached Pic should help you determine which filter. These old girls are a bit of a mine field of detail eh?
Logged

Offline beezalex

  • North Carolina, USA
  • Valued Contributor
  • ****
  • Join Date: Jan 2008
  • Posts: 374
  • Karma: 4
Re: Air filter connection rubber
« Reply #3 on: 01.06. 2011 13:49 »
Brilliant!  I've ordered other stuff from clauss studios for my Zundapp Bella and it's all top-notch stuff.  Looks like I'll be ordering some more...I've actually been putting off my reversion/conversion to the original carb/air cleaner setup because of this.
Logged
Alex

Too many BSA's

Pages: [1]   Go Up
« previous next »