Clutch pushrod length

[taroha10]

Evening all,
can someone verify the exact length the clutch pushrod should be.Have just bought 1960 Super Rocket and this is my first a10 with the Triumph clutch.(had two before with 6 spring)As the pushrod was bent and showing signes of abuse I ordered a new one which has come a little shorter.One on bike is 11.and15.16 of an inch.New one 11.and 27. 32ths.
Chap who ordered it said there was a difference with the 4  and 6 spring clutch pushrod lenghts.Which one is correct.It would be nice to have a second (or more) opinion before I return.
Cheers.  Taroh.

[mikethebrush]

I asked the same question a few weeks ago and got some very helpfull replies

the pushrod should 12" for the 4 spring conversion

[mikethebrush]

I dont know how to link Taroh so ive brought the thread back up to page 1

[anjimehra]

Hi Taroh
Ive just finished restoring my plunger A10 with a 6 spring clutch & the rod length is 11.5 ins. I believe for the 4 spring clutch it is 12 ins
Anji

[taroha10]

Thanks to Mikethebrush and Anjimehra for thse speedy replies.Looks like my replacement may be wrong.
Good news is I now have paperwork sorted (went to DVLA today).It was all a bit of a jumble.
Cheers again