« previous next »
Pages: [1]   Go Down

Author Topic: Torque Figures  (Read 1098 times)

Offline davewes

  • Active
  • *
  • Join Date: May 2010
  • Posts: 5
  • Karma: 1
Torque Figures
« on: 22.05. 2010 20:05 »
I've just returned to biking and bought a 1958 Gold Flash. I'm changing the head gasket (cast iron head) but can't find the torque loading figures anywhere (including in the Haynes Manual). Can anyone help?
Logged

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3222
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Torque Figures
« Reply #1 on: 22.05. 2010 21:24 »
Logged


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11032
  • Karma: 132
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Torque Figures
« Reply #2 on: 22.05. 2010 21:43 »
G'day Dave,
                    Welcome to the A list. Nice choice for your return.
 35ft/lb is near the mark. Anneal the copper gasket (heat to cherry red and quench in water).
 As e said, search reveals lots of interesting stuff.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6471
  • Karma: 55
Re: Torque Figures
« Reply #3 on: 22.05. 2010 22:13 »
...and we should mention the need to use thick hard washers that are very close to the same diameter as the counterbores at each head-bolt hole. These will keep your alloy head from squashing around the head bolts.

Richard L.
Logged
Pages: [1]   Go Up
« previous next »